Window Film Installation Instructions

Remove the clear backing liner from the film. If you can not do this by hand get a piece of sticky tape at wither side of a corner and this will help to free the liner. It is easier if someone can hold the film for you.

Completely spray the adhesive with the slip solution. Make sure that the film does not fold on itself whilst doing this as the adhesive will stick to itself and the film will be ruined. Once the adhesive is sprayed the adhesive shouldn't be able to stick on itself. Make sure the adhesive doesn't touch anything whilst doing this as contamination could be picked up. It's also a good idea to spray the window as well in case you missed a spot on the film.

Place the film adhesive side onto the window.

Using a sharp blade trim the film to the edge of the film. Go slowly and try to get the film within 1 mm of the edge for a neat finish. Our installation kits come with an edge guide to help you.